一类具有时滞和Gompertz增长率的捕食系统的稳定性与Hopf分支

研究一类具有时滞和Gompertz增长率的捕食系统,通过分析系统的特征方程,得到正平衡点的局部稳定性和系统出现Hopf分支的条件,并利用中心流形定理和规范型理论,得到确定Hopf分支方向和分支周期解稳定性的计算公式．     

Military Spending and Economic Growth: The Case of Iran

Over the last decade, the Iranian Government budget on military has been higher than the average of the world. The current increasing international sanctions aim to reduce the military capabilities and capacities of the Iranian Government. We analyze the response of the Iranian economy to shocks in its military budget from 1959 to 2007, using impulse response functions and variance decomposition analysis. The Granger causality results show that there is unidirectional causality from the military spending growth rate to the economic growth rate. The response of income growth to increasing shocks in the military budget is positive and statistically significant.     

逆变器-异步电机电磁噪声的分析与研究

利用Ansoft建立了样机的二维模型,计算了样机在空载运行下的各性能参数,分析了样机内的磁场分布情况.在此基础上,计算了负载大小、机壳设计尺寸和逆变器供电对异步电机电磁噪声的影响.仿真分析表明:通过合理改变机壳尺寸和质量以及选择合适的逆变器开关频率的方法可实现异步电机的降噪.     

部分频带干扰下伪码跟踪误差分析

为精确分析部分频带干扰下伪码跟踪误差,需要考虑伪码的非理想随机特性。引入伪码的精细功率谱模型,对比分析了不同带宽干扰下基于简化谱和精细谱的码跟踪误差。定义了相对误差系数,用以定量描述伪码非理想随机特性对码跟踪误差的影响。当干扰带宽增大时,相对误差系数逐渐减小,伪码非理想随机特性对码跟踪误差的影响逐渐减小,基于简化谱的分析趋近于基于精细谱的分析。结合GPS L1 C/A码,给出了相对误差小于0.2的最小干扰带宽,并将其作为基于简化谱分析的适用条件。研究表明当干扰带宽大于伪码周期的频率的300倍时,伪码非理想随机特性导致的码跟踪精度变化可忽略,反之,则需要基于精细的功率谱模型进行码跟踪精度分析。     

阶比谱分析与汽车起动电机故障的实时诊断

本文主要论述阶比谱分析方法及其在汽车起动电机故障实时诊断中的应用。首先阐述了阶比谱分析的原理以及阶比采样中混迭与泄漏的产生及其抑制方法,然后讨论了如何在起动电机运行过程短、升速快的情况下获取感兴趣的噪声信号,进而采用阶比谱分析方法从信号中提取故障特征信息,最后利用阀值判别法起动电机的故障进行实时诊断。     

一种跳码直扩通信技术体制探讨

针对传统直扩通信技术体制在军事通信应用中存在的不足,提出了一种新型跳码直扩通信技术体制及其扩展型跳码/跳频混合扩谱通信技术体制,分析了其基本性能,该体制可望解决常规直扩通信技术体制中的一些难题,提高军事通信中直扩通信系统的反侦察能力。     

Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

基于小波变换的舰船辐射噪声调制特征分析

舰船辐射噪声在不同频带上的调制是有差异,利用多子带技术可以得到不同频带上的调制谱.研究了多子带分析技术以及利用小波包分析获得不同频带上的调制谱技术,利用最小信息熵准则对小波包分解进行了优化.双比两种方法,得到了一些有益的结论.试验表明,多子带分析技术对识别工程应用有指导意义.     

本征模式函数与经验模式分解方法分析

介绍本征模式函数IMF满足的条件和定义,分析了经验摸式分解EMD的前提、本质及其对非线性平衡系统数据处理所体现的优越性,并以隧道采集的风力数据处理为例,对上述理论进行了验证,展示了这种新方法的作用和效果。最后,从理论上证明了所处理数据的完备性及EMD成员正交性应满足的条件。